Conference tables for law firms are sized by one number: 30 inches of table edge per seat. A 10 foot table seats 10 to 12, a 14 foot table seats 14 to 16. Get that wrong and partners eat elbows for twenty years.
Below are nine solid hardwood conference tables we build to order for law offices, in black walnut or white oak, each shown in a real firm setting. Every one is made to your room rather than a stock size. Browse the full conference table collection if you already know the length you need.
Nine conference tables for law firms
The Hartford
Black walnut, clear finish
The Hartford anchors a partners’ boardroom the way a good closing argument anchors a case. Book-matched black walnut runs the full length of the top, and the blackened steel base keeps the sightlines clean so nothing competes with the people in the room. Built to seat a full partnership, or scaled to the room you actually have.
The Westbrook
Black walnut, clear finish
Estate work is quiet, careful, and personal, and the Westbrook reads that way. The walnut is warm without being showy, and the open U-base leaves legroom for long meetings where clients sign the documents that outlast them. Every Westbrook is made to your length.
The Cassian
White oak, clear finish
White oak brings light into a room that spends its days on patents and filings. The Cassian’s narrow, elongated top suits a working conference room where drawings and prototypes get spread out. Clear-finished oak shrugs off years of use and still looks new.
The Foundry
Black walnut, Rubio black finish
Some rooms are built for weight. The Foundry in Rubio black is nearly monolithic, a dark walnut slab on a heavy base that makes a defense conference room feel as serious as the work done in it. The finish is hand-applied oil, not a sprayed lacquer, so it ages instead of chipping.
The Dakota
White oak, clear finish
Family law happens across a table, often on hard days, so the table should feel human. The Dakota’s rustic white oak keeps its knots and character, and the sculptural steel base gives it a lighter footprint in a smaller conference room. Warm, honest, and built to last through every case.
The Timberline
Black walnut, clear finish
The Timberline is long and lean, a walnut top that runs deep into the room for depositions and multi-party meetings. Clean lines, a steel base that stays out of the way, and enough length to seat both sides of a dispute without anyone feeling crowded.
The Nordic
White oak, Rubio natural finish
The Nordic sets a calm, confident tone the moment a client walks in. Honey-toned white oak in a natural oil finish photographs beautifully and wears even better, which matters in a room that hosts a steady stream of first meetings. Set for a full table, ready to work.
The Sequoia
Black walnut, clear finish
The Sequoia is the boardroom classic, a straightforward walnut top on a solid base that looks right under any brand on the wall. It is the table you stop noticing after five minutes, which is exactly what you want when the meeting is what matters.
The Larsen
White oak, clear finish
Not every firm needs a twelve-seat monolith. The Larsen is sized for the boutique practice, an oak table that doubles as a working library table and a place to close a matter. Solid throughout, built to your room, and priced for a growing firm to say yes.
How long a table does your firm need?
Plan on roughly 30 inches of table edge per seated person, plus room at each end. An eight-foot table seats eight to ten comfortably, a twelve-foot table seats twelve to fourteen, and anything past sixteen feet moves into full partners’ boardroom territory. Because every Fargo Woodworks table is built to order, you tell us the room and we build the length that fits it, not the nearest stock size.
- 8 ft, seats 8 to 10. Fits a room 16 by 12 ft with chairs pulled out.
- 10 ft, seats 10 to 12. The most specified length for a partners’ room.
- 12 ft, seats 12 to 14. Needs 20 by 14 ft to walk behind seated chairs.
- 14 ft and over, seats 14 to 18. Built in sections so it makes the elevator.
Allow 36 inches of clearance behind each chair to walk past someone seated, and 29 to 30 inches of height so a standard conference chair tucks under.
Walnut or white oak?
Black walnut is the traditional law-firm choice: darker, richer, and formal, it suits partner boardrooms and rooms that want to feel established. White oak is lighter and more contemporary, and it brightens a working conference room or a smaller office. Both are solid hardwood all the way through, and both come in clear or darker oil finishes. There is no wrong answer, only the tone you want a client to feel when they sit down.
Both are solid hardwood throughout, not a veneer over a core. Black walnut reads darker and warmer and suits a traditional partners’ room. White oak is about 35% harder on the Janka scale (1,360 lbf against 1,010) and reads lighter and more current. See both in the collection.
Why solid hardwood, not veneer?
A veneer table is a thin slice of wood glued over particleboard, and once an edge chips it cannot be repaired. A solid hardwood table can be sanded and refinished decades from now and come back like new. For a piece that will host thousands of meetings, solid wood is the only version that still looks like the firm you want to be in twenty years.
A veneer top is a paper-thin sheet of wood over particleboard. Once an edge chips there is nothing underneath to repair. A solid top sands back and refinishes as many times as the firm needs it to, which is why we do not sell a veneer option.
Specifying yours
Send us the room dimensions, the number of seats, and if power and data need to run through the top. We come back with a drawing and a species recommendation before anything is cut. Start from any table in the conference table collection or from a commercial piece you have already seen.
Frequently asked questions from law firms
How many people does a conference table seat?
Allow about 30 inches of table edge per person. An 8 foot table seats 8 to 10, a 10 foot table seats 10 to 12, a 12 foot table seats 12 to 14, and we build longer for full boardrooms. Every table is made to your specified length.
Are these tables solid wood or veneer?
Every conference table is solid hardwood throughout, in black walnut or white oak. There is no veneer over particleboard, so the table can be refinished and repaired for the life of the firm.
Can we get a conference table in a custom size for our exact room?
Yes. Each table is built to order, so you give us the length, the width and the finish and we build to it. There is no upcharge for choosing a size that fits your room instead of a stock dimension.
What size room do we need for a 12 foot conference table?
About 20 by 14 feet. You want 36 inches of clearance behind each chair so someone can walk past a seated colleague without asking them to move.
How long does a custom conference table take to build?
Lead times vary with the piece and the season. Send us your room and finish and we will quote the build and give you a firm date.
Trusted by Industry Leaders